Introduction to several Power supply modes of Perfect electric transfer car

Author:perfte    Updatetime:2018-06-02 17:59   

The electric transfer car, produced by Henan Perfect handling equipment Company has several power supply modes. What do you have? Here is a detailed introduction:
Electric Transfer Car
 
To be sure, the electric transfer car, produced by Paffitt has seven modes of power supply.
 
The first is a low-voltage rail power supply mode, that is, the AC 380V power supply is lowered to 36V AC two-phase, respectively, connected to the two tracks running by the electric rail car, and the electricity is taken from the wheels and entered the electric control box on the vehicle. After rectifying to DC 36 V, for motor driving.
 
 
The second is the low-voltage rail power supply mode, that is, reducing the AC 380V power supply to 36V AC three-phase, adding a conductive rail between the tracks running by the rail car, and connecting the reduced AC 36V to the three tracks respectively. By taking electricity into the car electronic control box, and then through the boost to 380 V AC, for motor driving. The first low voltage mode is mainly used for vehicles with a load less than or equal to 50T, and the second low voltage mode is mainly for vehicles with a load greater than 50T.
 
The third, battery power supply, can guarantee 8-hour working system.
 
The fourth type is cable reel power supply, motor for 380 V AC.
 
The fifth type is towed cable power supply, motor 380 V AC, this kind of electric rail car, low cost.
 
The sixth kind, is the sliding contact line power supply, the motor is 380 V AC.
 
The seventh kind, is the slide line power supply, the motor is 380 V AC. Is to hang the cable in the air, similar to the fifth type, which is towed cable to supply power.